team@kempf-tools.de
Leintelstraße 8, 73262 Reichenbach/Fils
Carbide Insert for Aluminium, Plastics and Stainless Steel

Carbide Insert for Aluminium, Plastics and Stainless Steel

TCGT 16T3.. FN-250

Available variants

SQL-SortBasis: SELECT attr9 FROM s_articles_attributes aa, s_articles_details ad WHERE aa.articledetailsID = ad.id AND ad.active = 1 AND kind = 1 AND ad.articleID = 591

SQL-Basis: SELECT ad.id AS 'artdetailid', ordernumber, additionaltext, suppliernumber, kind FROM s_articles_attributes aa, s_articles_details ad WHERE aa.articledetailsID = ad.id AND ad.active = 1 AND ad.articleID = 591 ORDER BY attr7, attr8, ad.id

Article No. Reset Filter
Cutting material
Cutting material grade
Coating
Cutting edge length max.
Corner radius
Material suitability
TCGT 16T302 FN-250 DX2
Hartmetall
DX2
unbeschichtet
7 mm
0,2 mm
N
TCGT 16T302 FN-250 DX20
Hartmetall
DX20
PVD
7 mm
0,2 mm
M,N
TCGT 16T302 FN-250 DX30
Hartmetall
DX30
PVD
7 mm
0,2 mm
M,N
TCGT 16T304 FN-250 DX2
Hartmetall
DX2
unbeschichtet
7 mm
0,4 mm
N
TCGT 16T304 FN-250 DX20
Hartmetall
DX20
PVD
7 mm
0,4 mm
M,N
TCGT 16T304 FN-250 DX30
Hartmetall
DX30
PVD
7 mm
0,4 mm
M,N
TCGT 16T308 FN-250 DX2
Hartmetall
DX2
unbeschichtet
7 mm
0,8 mm
N
TCGT 16T308 FN-250 DX20
Hartmetall
DX20
PVD
7 mm
0,8 mm
M,N
TCGT 16T308 FN-250 DX30
Hartmetall
DX30
PVD
7 mm
0,8 mm
M,N
1 from 1
Product information "Carbide Insert for Aluminium, Plastics and Stainless Steel"
Freiwinkel: 7 °
Schneidenlänge, max.: 7 mm
Schneidstoff: Hartmetall
Schneidrichtung: N L/R/N
Schneidkantenlänge: 16,489 mm
Trennstellenkodierung Schneidplatte: TC1102
Schneidkantenhöhe: 3,97
Toleranzklasse Schneidplatte: G
Spanwinkel: 25 °
Schneidkantenausführung: F
Schneidplattenform: T
Related links to "Carbide Insert for Aluminium, Plastics and Stainless Steel"
Viewed